⚡ PWM Charge Controllers Prices in Nigeria
Browse market price ranges and available brands/models in this category.
Your saved SolarPriceNG planWe found recommendations from your calculator.
Choose a product category
All 289
Charge Controllers 42
Installation Services 21
Inverter Batteries 2
Solar Accessories 37
Solar Batteries 87
Solar Generators / Portable Power Stations 28
Solar Inverters 36
Solar Panels 36
Showing 15 product(s) in this category. Prices are estimated market ranges and can vary by seller, location, stock and specifications.
⚡ PWM Charge Controllers Price Guide
Typical ranges are calculated automatically from active products in this category.
10 A
₦5,000 – ₦9,000
1 product in database
20 A
₦6,000 – ₦12,000
2 products in database
30 A
₦6,000 – ₦20,000
4 products in database
40 A
₦14,000 – ₦45,000
3 products in database
50 A
₦20,000 – ₦30,000
1 product in database
60 A
₦11,000 – ₦75,000
4 products in database
How the prices compare
This category-level comparison normalizes recorded prices by the main capacity of the products. It is shown only when at least three products have enough data for a useful comparison.
About ₦183–₦1,250₦/ACalculated from 15 products with usable price and capacity data.
This is a comparison range, not a quoted seller price. Products can differ in brand, model, specification, availability and other factors.
How to compare charge controllers in Nigeria
Charge-controller selection depends on more than the advertised amp rating. The solar array, battery-system voltage, controller type and manufacturer PV limits need to be considered together.
What to check
Check MPPT or PWM type, rated charging current, supported battery voltage, maximum PV voltage and maximum PV power where available.
What affects price
Controller type, current rating, PV capacity, system voltage, brand, features and market availability can affect the price.
How to compare
Start with the controller rating required by the solar array, then check the manufacturer limits. Calculator matches are planning matches, not final product approval.
Common mistake
A controller can have enough advertised amps and still be unsuitable if the solar-array voltage or PV power exceeds its manufacturer limits.
Important: Prices shown on this page are estimates for comparison. Check the manufacturer information for the exact product specification before purchase or installation.
Available Brands & Models
Compare individual products below.
Generic 20A PWM
Generic • Generic 20A PWM
20 APWM
12V/24V, 20A, PWM
20 A₦6,000 – ₦12,000
Per Charge Controller
About ₦300–₦600/A
Price last reviewed Aug 21, 2026
Charge Controller
Generic 20A PWM
Generic • Generic 20A PWM
₦6,000 – ₦12,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
20 APWMAbout ₦300–₦600/A
About this product
Generic 20A PWM is a basic solar charge-controller listing recorded as 12/24V and 20A. It is intended for a small battery-based solar system where the battery voltage matches the controller setting and the charging current stays within the 20A rating. The record does not identify a manufacturer model and does not confirm the controller’s maximum PV voltage, maximum PV power or maximum PV input current. Check the label or manual for those limits before connecting panels, especially when using multiple modules. Confirm the battery voltage, panel wiring and protection requirements with the installer. Treat this product as an unverified generic controller until its exact specifications are confirmed.
Key specifications
| Brand | Generic |
|---|---|
| Model | Generic 20A PWM |
| Listed specification | 12V/24V, 20A, PWM |
| Primary rating / capacity | 20 A |
| Controller type | PWM |
| Rated current | 20 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Generic 10A PWM
Generic • Generic 10A PWM
10 APWM
12V/24V, 10A, PWM
10 A₦5,000 – ₦9,000
Per Charge Controller
About ₦500–₦900/A
Price last reviewed Aug 21, 2026
Charge Controller
Generic 10A PWM
Generic • Generic 10A PWM
₦5,000 – ₦9,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
10 APWMAbout ₦500–₦900/A
About this product
Generic 10A PWM is a small pulse-width-modulation solar charge controller listed for 12V/24V systems with a 10 A rating. The exact manufacturer and model variant are not identified in the record, so generic-controller specifications should be checked against the label or supplied manual before connection. Some matching generic 10A 12V/24V listings advertise an LCD, USB outputs, protection functions and a 50 V PV limit, but that PV limit is not treated as confirmed for this exact unit. Use the 10 A rating only as one part of sizing: confirm the panel voltage, battery voltage, battery chemistry settings and allowable solar input first.
Key specifications
| Brand | Generic |
|---|---|
| Model | Generic 10A PWM |
| Listed specification | 12V/24V, 10A, PWM |
| Primary rating / capacity | 10 A |
| Controller type | PWM |
| Rated current | 10 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
SATCL 60A PWM
SATCL • SATCL 60A PWM
60 APWM
12V/24V, 60A, PWM
60 A₦11,000 – ₦20,000
Per Charge Controller
About ₦183–₦333/A
Price last reviewed Aug 21, 2026
Charge Controller
SATCL 60A PWM
SATCL • SATCL 60A PWM
₦11,000 – ₦20,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
60 APWMAbout ₦183–₦333/A
About this product
SATCL 60A PWM is a 60 A pulse-width-modulation solar charge controller listed for 12V and 24V battery systems. The available Nigerian product listing reports a maximum PV voltage of 50 V and describes the unit as a PWM controller with USB outputs, LCD monitoring and protection functions. Its maximum PV power is not confirmed in the available evidence, so do not size the panel array from the 60 A rating alone. Match the array and battery voltage to the controller, stay below the confirmed 50 V PV-voltage limit, and check the label or manual before installation if the supplied unit is a different variant.
Key specifications
| Brand | SATCL |
|---|---|
| Model | SATCL 60A PWM |
| Listed specification | 12V/24V, 60A, PWM |
| Primary rating / capacity | 60 A |
| Controller type | PWM |
| Supported battery voltage | 12/24V |
| Rated current | 60 A |
| Maximum PV voltage | 50 V |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
POWLSOJX 30A PWM
POWLSOJX ` • POWLSOJX 30A PWM
30 APWM
12V/24V, 30A, PWM
30 A₦7,000 – ₦12,000
Per Charge Controller
About ₦233–₦400/A
Price last reviewed Aug 21, 2026
Charge Controller
POWLSOJX 30A PWM
POWLSOJX ` • POWLSOJX 30A PWM
₦7,000 – ₦12,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
30 APWMAbout ₦233–₦400/A
About this product
POWLSOJX 30A PWM is a 30 A pulse-width-modulation solar charge controller listed for automatic 12V/24V battery recognition. The available 30A manual describes LCD monitoring, USB outputs, multi-stage PWM charging and protection against conditions such as overcurrent, short circuit, reverse polarity and overcharging. The product evidence does not establish one reliable PV-voltage limit for this exact listing, so that value is left unconfirmed rather than guessed. Confirm the controller label or manual before connecting panels, and do not assume that every POWLSOJX 30A unit has the same PV limits or battery settings.
Key specifications
| Brand | POWLSOJX ` |
|---|---|
| Model | POWLSOJX 30A PWM |
| Listed specification | 12V/24V, 30A, PWM |
| Primary rating / capacity | 30 A |
| Controller type | PWM |
| Supported battery voltage | 12/24V |
| Rated current | 30 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Tasha 60A PWM
Tasha • Tasha 60A PWM
60 APWM
12V/24V, 60A, PWM
60 A₦20,000 – ₦45,000
Per Charge Controller
About ₦333–₦750/A
Price last reviewed Aug 21, 2026
Charge Controller
Tasha 60A PWM
Tasha • Tasha 60A PWM
₦20,000 – ₦45,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
60 APWMAbout ₦333–₦750/A
About this product
Tasha 60A PWM is a 60 A pulse-width-modulation solar charge controller. SolarPriceNG records this listing for 12V/24V battery systems. It is intended for installations where the panel array and battery voltage are matched to the controller; a PWM controller should not be treated as an MPPT controller. The available Tasha product page confirms a 60A PWM model but presents conflicting voltage and PV-limit details, so this listing does not confirm a maximum PV voltage or maximum PV power. Check the controller label or manual before installation, especially when using a higher-voltage panel array.
Key specifications
| Brand | Tasha |
|---|---|
| Model | Tasha 60A PWM |
| Listed specification | 12V/24V, 60A, PWM |
| Primary rating / capacity | 60 A |
| Controller type | PWM |
| Rated current | 60 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
SATCL 30A PWM
SATCL • SATCL 30A PWM
30 APWM
12V/24V, 30A, PWM
30 A₦6,000 – ₦12,000
Per Charge Controller
About ₦200–₦400/A
Price last reviewed Aug 21, 2026
Charge Controller
SATCL 30A PWM
SATCL • SATCL 30A PWM
₦6,000 – ₦12,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
30 APWMAbout ₦200–₦400/A
About this product
SATCL 30A PWM is a 30 A pulse-width-modulation solar charge controller listed for 12V and 24V battery systems. The available Nigerian listing reports a maximum PV voltage of 50 V and maximum solar input of up to 390 W on a 12V system or 780 W on a 24V system. It also advertises dual USB outputs and LFP/lithium support, but confirm the battery profile on the actual unit before connecting a lithium battery. Because this is PWM rather than MPPT, use a panel array whose voltage is suitable for the battery system and do not exceed the controller’s 50 V PV limit. Check the label or manual before installation if the unit supplied differs from the listing.
Key specifications
| Brand | SATCL |
|---|---|
| Model | SATCL 30A PWM |
| Listed specification | 12V/24V, 30A, PWM |
| Primary rating / capacity | 30 A |
| Controller type | PWM |
| Supported battery voltage | 12/24V |
| Rated current | 30 A |
| Maximum PV voltage | 50 V |
| Maximum PV power | 780 W |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Tasha 40A PWM
Tasha • Tasha 40A PWM
40 APWM
12V/24V, 40A, PWM
40 A₦14,000 – ₦40,000
Per Charge Controller
About ₦350–₦1,000/A
Price last reviewed Aug 21, 2026
Charge Controller
Tasha 40A PWM
Tasha • Tasha 40A PWM
₦14,000 – ₦40,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
40 APWMAbout ₦350–₦1,000/A
About this product
Tasha Energy 40A PWM is a solar charge controller for 12V or 24V battery systems. It is rated at 40A, with a maximum PV voltage of 50V. Tasha's published specification gives maximum PV input power of 520W on a 12V system or 1,040W on a 24V system. Use the controller with an array that stays within the 50V PV limit and the power limit for the selected battery voltage. Allow for the rise in panel open-circuit voltage in cold conditions, and match the panel arrangement to the battery bank rather than relying on the 40A rating alone. The exact unit's manual should be checked for any installation or battery-program details not included in the published specification.
Key specifications
| Brand | Tasha |
|---|---|
| Model | Tasha 40A PWM |
| Listed specification | 12V/24V, 40A, PWM |
| Primary rating / capacity | 40 A |
| Controller type | PWM |
| Supported battery voltage | 12V/24V |
| Rated current | 40 A |
| Maximum PV voltage | 50 V |
| Maximum PV power | 1040 W |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Tasha 30A PWM
Tasha • Tasha 30A PWM
30 APWM
12V/24V, 30A, PWM
30 A₦14,000 – ₦20,000
Per Charge Controller
About ₦467–₦667/A
Price last reviewed Aug 21, 2026
Charge Controller
Tasha 30A PWM
Tasha • Tasha 30A PWM
₦14,000 – ₦20,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
30 APWMAbout ₦467–₦667/A
About this product
Tasha Energy 30A PWM is a solar charge controller for 12V or 24V battery systems. It is rated at 30A, with a maximum PV voltage of 50V. Tasha's published specification gives maximum PV input power of 390W on a 12V system or 780W on a 24V system. This is a PWM controller, so panel voltage and array sizing must be matched carefully to the battery-bank voltage. Keep the array's open-circuit voltage below the controller limit, including any increase caused by cold conditions, and confirm the battery charging settings before installation. The exact unit's manual should be checked if you need details not shown in the published specification, such as wiring limits or battery-program options.
Key specifications
| Brand | Tasha |
|---|---|
| Model | Tasha 30A PWM |
| Listed specification | 12V/24V, 30A, PWM |
| Primary rating / capacity | 30 A |
| Controller type | PWM |
| Supported battery voltage | 12V/24V |
| Rated current | 30 A |
| Maximum PV voltage | 50 V |
| Maximum PV power | 780 W |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
SRNE 60A PWM
SRNE • SRNE 60A PWM
60 APWM
12V/24V, 60A, PWM
60 A₦65,000 – ₦75,000
Per Charge Controller
About ₦1,083–₦1,250/A
Price last reviewed Aug 21, 2026
Charge Controller
SRNE 60A PWM
SRNE • SRNE 60A PWM
₦65,000 – ₦75,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
60 APWMAbout ₦1,083–₦1,250/A
About this product
SRNE 60A PWM is a higher-current solar charge controller listed for 12V/24V battery systems. Its 60A rating describes the maximum charging-current class; it is not an inverter rating or a measure of battery capacity. The controller regulates solar charging and may provide a DC load output, depending on the exact model. SRNE’s official 12V/24V PWM documentation for the HC2460-C and HP2460 lists a maximum PV open-circuit voltage of 55V and maximum PV input power of 900W at 12V or 1,800W at 24V. The Price Manager record does not identify the series or complete model code, so verify the label and manual before relying on these figures for this particular unit. Check the array’s open-circuit voltage and power, including cold-weather conditions, before connection. PWM controllers need the panel and battery voltage arrangement to be matched correctly; they do not provide the voltage-conversion benefit of MPPT. Confirm battery-chemistry settings, PV input limits, load rating, fuse and breaker sizes, and cable size before installation. Do not assume this listing supports a 36V or 48V battery bank.
Key specifications
| Brand | SRNE |
|---|---|
| Model | SRNE 60A PWM |
| Listed specification | 12V/24V, 60A, PWM |
| Primary rating / capacity | 60 A |
| Controller type | PWM |
| Supported battery voltage | 12/24V |
| Rated current | 60 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
SRNE 40A PWM
SRNE • SRNE 40A PWM
40 APWM
12V/24V, 40A, PWM
40 A₦38,000 – ₦45,000
Per Charge Controller
About ₦950–₦1,125/A
Price last reviewed Aug 21, 2026
Charge Controller
SRNE 40A PWM
SRNE • SRNE 40A PWM
₦38,000 – ₦45,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
40 APWMAbout ₦950–₦1,125/A
About this product
SRNE 40A PWM is a solar charge controller listed for 12V/24V battery systems, with a 40A charging-current rating. It regulates power from the solar panels into the battery and may also provide a DC load output, depending on the exact SRNE model. SRNE’s official 12V/24V PWM documentation for models such as the HC2440-C and HP2440 lists a maximum PV open-circuit voltage of 55V and maximum PV input power of 600W at 12V or 1,200W at 24V. This Price Manager record does not identify the series or full model code, so treat those figures as a reference for possible matches—not as confirmed limits for this particular unit. Check the label and manual before connecting panels, especially if panels will be wired in series. Because this is PWM, the panel voltage must be matched appropriately to the battery system; it is not a replacement for an MPPT controller when higher-voltage panels need voltage conversion. Confirm the battery-chemistry settings, PV limits, load rating, fuse and breaker sizes, and cable size before installation. The 40A figure is charge current, not inverter capacity, and this listing should not be assumed to support a 36V or 48V battery bank.
Key specifications
| Brand | SRNE |
|---|---|
| Model | SRNE 40A PWM |
| Listed specification | 12V/24V, 40A, PWM |
| Primary rating / capacity | 40 A |
| Controller type | PWM |
| Supported battery voltage | 12/24V |
| Rated current | 40 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Roy 60A PWM
Roy • Roy 60A PWM
60 APWM
12V/24V/48V, 60A, PWM
60 A₦26,000 – ₦35,000
Per Charge Controller
About ₦433–₦583/A
Price last reviewed Aug 21, 2026
Charge Controller
Roy 60A PWM
Roy • Roy 60A PWM
₦26,000 – ₦35,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
60 APWMAbout ₦433–₦583/A
About this product
Roy 60A PWM is the highest-current controller in this supplied Roy listing group, shown as a 60A PWM unit for 12V, 24V or 48V systems. The 60A figure identifies its rated-current class, but it does not by itself determine the correct solar-panel wattage, battery size or wiring. The exact model code and the maximum PV voltage, maximum PV power and maximum PV input current are not confirmed in the available record. Before using it in a Nigerian installation, verify the label and obtain the seller’s matching datasheet. Check the selected battery voltage, panel configuration, battery compatibility, terminals and cable size first; the 12V/24V/48V listing claim should not be used alone to approve a 48V system.
Key specifications
| Brand | Roy |
|---|---|
| Model | Roy 60A PWM |
| Listed specification | 12V/24V/48V, 60A, PWM |
| Primary rating / capacity | 60 A |
| Controller type | PWM |
| Supported battery voltage | 12V/24V/48V |
| Rated current | 60 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Roy 50A PWM
Roy • Roy 50A PWM
50 APWM
12V/24V/48V, 50A, PWM
50 A₦20,000 – ₦30,000
Per Charge Controller
About ₦400–₦600/A
Price last reviewed Aug 21, 2026
Charge Controller
Roy 50A PWM
Roy • Roy 50A PWM
₦20,000 – ₦30,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
50 APWMAbout ₦400–₦600/A
About this product
Roy 50A PWM is a 50A PWM solar charge controller listed for 12V, 24V or 48V systems. That makes the battery-voltage label especially important: a controller marked for several system voltages still has to be configured or identified correctly for the battery bank being used. The available record does not confirm the exact model code, maximum PV voltage, maximum PV power or maximum PV input current. Do not size a series-connected panel array from the 50A figure alone. Ask the Nigerian seller or installer to verify the unit label, supported battery voltage, panel limits, battery compatibility and cable requirements before connection. The 12V/24V/48V information remains a listing claim until it is matched to the delivered unit’s documentation.
Key specifications
| Brand | Roy |
|---|---|
| Model | Roy 50A PWM |
| Listed specification | 12V/24V/48V, 50A, PWM |
| Primary rating / capacity | 50 A |
| Controller type | PWM |
| Supported battery voltage | 12V/24V/48V |
| Rated current | 50 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Solar Charge Controller FAQs
Common questions about charge controller prices, MPPT, PWM and choosing the right controller for solar panels.
What size solar charge controller do I need?
The required controller size depends on your solar array current, system voltage and controller type. Check the panel and controller ratings together rather than choosing by amp rating alone.
What is the difference between MPPT and PWM charge controllers?
MPPT controllers can adjust the operating point of the solar array to transfer energy efficiently to the battery, while PWM controllers use a simpler charging method. The appropriate choice depends on the system and budget.
How much does a solar charge controller cost in Nigeria?
Prices vary with current rating, system voltage, MPPT or PWM type, brand and features. Compare the listed products and estimated market ranges above.
Can I use a 48V charge controller with any solar panel?
No. The controller must support the battery-system voltage and the solar array voltage/current within its specified limits. Always check the controller's input and charging specifications.