Charge Controllers Prices in Nigeria
Browse market price ranges and available brands/models in this category.
Your saved SolarPriceNG planWe found recommendations from your calculator.
Choose a product category
All 289
Charge Controllers 42
Installation Services 21
Inverter Batteries 2
Solar Accessories 37
Solar Batteries 87
Solar Generators / Portable Power Stations 28
Solar Inverters 36
Solar Panels 36
Showing 42 product(s) in this category. Prices are estimated market ranges and can vary by seller, location, stock and specifications.
Charge Controllers Price Guide
Choose a section below to see that battery or product type on its own. The products section underneath still includes this category and its subcategories.
How the prices compare
This category-level comparison normalizes recorded prices by the main capacity of the products. It is shown only when at least three products have enough data for a useful comparison.
About ₦183–₦7,750₦/ACalculated from 42 products with usable price and capacity data.
This is a comparison range, not a quoted seller price. Products can differ in brand, model, specification, availability and other factors.
How to compare charge controllers in Nigeria
Charge-controller selection depends on more than the advertised amp rating. The solar array, battery-system voltage, controller type and manufacturer PV limits need to be considered together.
What to check
Check MPPT or PWM type, rated charging current, supported battery voltage, maximum PV voltage and maximum PV power where available.
What affects price
Controller type, current rating, PV capacity, system voltage, brand, features and market availability can affect the price.
How to compare
Start with the controller rating required by the solar array, then check the manufacturer limits. Calculator matches are planning matches, not final product approval.
Common mistake
A controller can have enough advertised amps and still be unsuitable if the solar-array voltage or PV power exceeds its manufacturer limits.
Important: Prices shown on this page are estimates for comparison. Check the manufacturer information for the exact product specification before purchase or installation.
Available Brands & Models
Compare individual products below.
SRNE 40A PWM
SRNE • SRNE 40A PWM
40 APWM
12V/24V, 40A, PWM
40 A₦38,000 – ₦45,000
Per Charge Controller
About ₦950–₦1,125/A
Price last reviewed Aug 21, 2026
Charge Controller
SRNE 40A PWM
SRNE • SRNE 40A PWM
₦38,000 – ₦45,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
40 APWMAbout ₦950–₦1,125/A
About this product
SRNE 40A PWM is a solar charge controller listed for 12V/24V battery systems, with a 40A charging-current rating. It regulates power from the solar panels into the battery and may also provide a DC load output, depending on the exact SRNE model. SRNE’s official 12V/24V PWM documentation for models such as the HC2440-C and HP2440 lists a maximum PV open-circuit voltage of 55V and maximum PV input power of 600W at 12V or 1,200W at 24V. This Price Manager record does not identify the series or full model code, so treat those figures as a reference for possible matches—not as confirmed limits for this particular unit. Check the label and manual before connecting panels, especially if panels will be wired in series. Because this is PWM, the panel voltage must be matched appropriately to the battery system; it is not a replacement for an MPPT controller when higher-voltage panels need voltage conversion. Confirm the battery-chemistry settings, PV limits, load rating, fuse and breaker sizes, and cable size before installation. The 40A figure is charge current, not inverter capacity, and this listing should not be assumed to support a 36V or 48V battery bank.
Key specifications
| Brand | SRNE |
|---|---|
| Model | SRNE 40A PWM |
| Listed specification | 12V/24V, 40A, PWM |
| Primary rating / capacity | 40 A |
| Controller type | PWM |
| Supported battery voltage | 12/24V |
| Rated current | 40 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Roy 60A PWM
Roy • Roy 60A PWM
60 APWM
12V/24V/48V, 60A, PWM
60 A₦26,000 – ₦35,000
Per Charge Controller
About ₦433–₦583/A
Price last reviewed Aug 21, 2026
Charge Controller
Roy 60A PWM
Roy • Roy 60A PWM
₦26,000 – ₦35,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
60 APWMAbout ₦433–₦583/A
About this product
Roy 60A PWM is the highest-current controller in this supplied Roy listing group, shown as a 60A PWM unit for 12V, 24V or 48V systems. The 60A figure identifies its rated-current class, but it does not by itself determine the correct solar-panel wattage, battery size or wiring. The exact model code and the maximum PV voltage, maximum PV power and maximum PV input current are not confirmed in the available record. Before using it in a Nigerian installation, verify the label and obtain the seller’s matching datasheet. Check the selected battery voltage, panel configuration, battery compatibility, terminals and cable size first; the 12V/24V/48V listing claim should not be used alone to approve a 48V system.
Key specifications
| Brand | Roy |
|---|---|
| Model | Roy 60A PWM |
| Listed specification | 12V/24V/48V, 60A, PWM |
| Primary rating / capacity | 60 A |
| Controller type | PWM |
| Supported battery voltage | 12V/24V/48V |
| Rated current | 60 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Roy 50A PWM
Roy • Roy 50A PWM
50 APWM
12V/24V/48V, 50A, PWM
50 A₦20,000 – ₦30,000
Per Charge Controller
About ₦400–₦600/A
Price last reviewed Aug 21, 2026
Charge Controller
Roy 50A PWM
Roy • Roy 50A PWM
₦20,000 – ₦30,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
50 APWMAbout ₦400–₦600/A
About this product
Roy 50A PWM is a 50A PWM solar charge controller listed for 12V, 24V or 48V systems. That makes the battery-voltage label especially important: a controller marked for several system voltages still has to be configured or identified correctly for the battery bank being used. The available record does not confirm the exact model code, maximum PV voltage, maximum PV power or maximum PV input current. Do not size a series-connected panel array from the 50A figure alone. Ask the Nigerian seller or installer to verify the unit label, supported battery voltage, panel limits, battery compatibility and cable requirements before connection. The 12V/24V/48V information remains a listing claim until it is matched to the delivered unit’s documentation.
Key specifications
| Brand | Roy |
|---|---|
| Model | Roy 50A PWM |
| Listed specification | 12V/24V/48V, 50A, PWM |
| Primary rating / capacity | 50 A |
| Controller type | PWM |
| Supported battery voltage | 12V/24V/48V |
| Rated current | 50 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Roy 40A PWM
Roy • Roy 40A PWM
40 APWM
12V, 24V, 40A, PWM
40 A₦17,000 – ₦25,000
Per Charge Controller
About ₦425–₦625/A
Price last reviewed Aug 21, 2026
Charge Controller
Roy 40A PWM
Roy • Roy 40A PWM
₦17,000 – ₦25,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
40 APWMAbout ₦425–₦625/A
About this product
Roy 40A PWM is a higher-current PWM solar charge controller listed for 12V or 24V battery systems, with a 40A rated-current figure. The controller type and current class are clear from the listing, but the current rating alone does not tell you the safe panel wattage or PV voltage. The exact model code and the maximum PV voltage, maximum PV power and maximum PV input current are not confirmed in the available record. Before purchase or installation, have the Nigerian seller match the controller label to a datasheet and confirm the battery voltage, panel arrangement, battery compatibility and cable size. The 12V/24V listing should be checked against the actual unit because no exact manufacturer document has been established for this Roy model.
Key specifications
| Brand | Roy |
|---|---|
| Model | Roy 40A PWM |
| Listed specification | 12V, 24V, 40A, PWM |
| Primary rating / capacity | 40 A |
| Controller type | PWM |
| Supported battery voltage | 12V/24V |
| Rated current | 40 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Roy 30A PWM
Roy • Roy 30A PWM
30 APWM
24V, 30A, PWM
30 A₦10,000 – ₦15,000
Per Charge Controller
About ₦333–₦500/A
Price last reviewed Aug 21, 2026
Charge Controller
Roy 30A PWM
Roy • Roy 30A PWM
₦10,000 – ₦15,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
30 APWMAbout ₦333–₦500/A
About this product
Roy 30A PWM is a solar charge controller listed as a 30A PWM unit for a 24V system. Its 30A rating describes the maximum charging-current class shown for the controller; it is not a complete specification for the solar array or battery bank. The available record does not confirm a full manufacturer model code, maximum PV voltage, maximum PV power or maximum PV input current. Those figures are important before using it with panels in Nigeria, especially when panels may be wired in series. Ask the seller or installer to verify the label, battery compatibility, panel limits and cable requirements. Do not treat the 24V and 30A listing figures as a substitute for the unit’s datasheet.
Key specifications
| Brand | Roy |
|---|---|
| Model | Roy 30A PWM |
| Listed specification | 24V, 30A, PWM |
| Primary rating / capacity | 30 A |
| Controller type | PWM |
| Supported battery voltage | 24V |
| Rated current | 30 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Roy 20A PWM
Roy • Roy 20A PWM
20 APWM
12V, 20A, PWM
20 A₦6,600 – ₦10,000
Per Charge Controller
About ₦330–₦500/A
Price last reviewed Aug 21, 2026
Charge Controller
Roy 20A PWM
Roy • Roy 20A PWM
₦6,600 – ₦10,000
Estimated Nigerian market range. Seller prices can differ by location, stock, model and specification.
20 APWMAbout ₦330–₦500/A
About this product
Roy 20A PWM is a solar charge controller listed as a 20A PWM unit for a 12V system. The 20A figure is the controller’s rated charging-current class; it is not the same as the amount of energy the battery stores and it does not, by itself, approve a particular solar-panel array. This listing does not establish the controller’s maximum PV voltage, maximum PV power, maximum PV input current or full model code. Because no matching manufacturer datasheet has been confirmed for this exact Roy listing, check those limits with the Nigerian seller before connecting panels. Confirm battery compatibility, cable size and the correct battery-first connection procedure during installation. Use the 12V listing information only after it matches the label on the unit you receive.
Key specifications
| Brand | Roy |
|---|---|
| Model | Roy 20A PWM |
| Listed specification | 12V, 20A, PWM |
| Primary rating / capacity | 20 A |
| Controller type | PWM |
| Supported battery voltage | 12V |
| Rated current | 20 A |
How to use this information
Check current rating, battery voltage and PV limits against the planned array.
Solar Charge Controller FAQs
Common questions about charge controller prices, MPPT, PWM and choosing the right controller for solar panels.
What size solar charge controller do I need?
The required controller size depends on your solar array current, system voltage and controller type. Check the panel and controller ratings together rather than choosing by amp rating alone.
What is the difference between MPPT and PWM charge controllers?
MPPT controllers can adjust the operating point of the solar array to transfer energy efficiently to the battery, while PWM controllers use a simpler charging method. The appropriate choice depends on the system and budget.
How much does a solar charge controller cost in Nigeria?
Prices vary with current rating, system voltage, MPPT or PWM type, brand and features. Compare the listed products and estimated market ranges above.
Can I use a 48V charge controller with any solar panel?
No. The controller must support the battery-system voltage and the solar array voltage/current within its specified limits. Always check the controller's input and charging specifications.